108
108 EN
EPIR3 User Manual v1.3
7.11.2.1. GPRS Network
The system supports data transmission to the monitoring station via IP-based networks by GPRS network. The
supported data formats are the following:
•
EGR100
•
Kronos
To set up the system for data transmission via GPRS network, please follow the basic configuration steps:
1. Enable MS Mode parameter (see
7.11. Monitoring Station
).
2. Set 4-digit Account number (see
7.11. Monitoring Station
).
3. Set server IP address, which is a public IP address of the machine running EGR100 or Kronos
monitoring station software.
4. Set server port, which is a port of the machine running EGR100 or Kronos monitoring
station software.
5. Select TCP or UDP protocol. UDP is highly recommended for EGR100 data format.
6. Select data format: EGR100 or Kronos
7. In case EGR100 is selected, set 4-digit Unit ID number. Unit ID number can be identical
to Account number.
8. Set up APN, user name and password provided by the GSM operator. Depending on the
GSM operator, only APN might be required to set up.
By default, if the initial attempt to transmit data to the monitoring station via GPRS network
method is unsuccessful, the system will make up to 2 additional attempts. If all attempts are
unsuccessful, the system will switch to next backup connection that follows in the sequence
and will attempt to transmit data until it is successfully delivered to the monitoring station.
To report the online status, the system periodically transmits (By default – every 180
seconds) Test Event data message (ping) to the monitoring station via GPRS network
Содержание EPIR3
Страница 1: ...EPIR3GSM Alarm System...
Страница 120: ...120 120 EN EPIR3 User Manual v1 3 EWR2 wireless signal repeater EWK2A wireless keyfob...
Страница 123: ......
Страница 124: ...MadeintheEuropeanUnion www eldes lt...