Eldes ELAN3-SNMP, Руководство пользователя

Страница: 14 / 18

14 14 EN ELAN3 SNMP Ethernet Controller
5.1.8. Monitoring
In this section the user can monitor the input value and state as well as the temperature sensors. The page is automatically refreshed
every 5 seconds.
13
Input1... 4:
• Status – State of the digital input. Value range: 0 – input restored; 1 – input violated; Na – not available.
• Value – Voltage value (mV) provided to the analog input. Value range: 1... 10000 mV ; Na – not available
Temp1... 8:
• Value – Temperature value of the area surrounding the temperature sensor. Value range: -125... 55 °C; Na – not available
5.2. SNMP Manager
The configured via Simple Network Management Protocol (SNMP v1.0) is carried out by transmitting the SET/GET message from SNMP
Manager software to ELAN3-SNMP device. The tables provided in the following sections describe supported parameters, OIDs, actions
available for each parameter which can be configured via SNMP as well as value range and an example/comment. Please, note that the
tables reflect the parameters described in the sub-sections of 5.1. Web Browser.
5.2.1.
Network
Parameter name OID Access Value Example / comment
LAN IP Address 1.3.6.1.4.1.34093.1.2.10.1.0 get/set IP address e.g. 192.168.1.101
LAN Net Mask 1.3.6.1.4.1.34093.1.2.10.2.0 get/set subnet IP e.g. 255.255.255.0
Default Gateway 1.3.6.1.4.1.34093.1.2.10.3.0 get/set gateway IP e.g. 192.168.1.1
Local Web Server Port 1.3.6.1.4.1.34093.1.2.11.3.0 get/set number e.g. 80
Firmware version 1.3.6.1.4.1.34093.1.2.12.1.0 read number e.g. 80
DHCP 1.3.6.1.4.1.34093.1.2.11.5.0 get/set 0, 1
0 = disabled;
1 = enabled
5.2.2. Authentication
Parameter name OID Access Value Example / comment
Username 1.3.6.1.4.1.34093.1.2.11.1.0 get/set
text (16 chars
max.)
e.g. user
Password 1.3.6.1.4.1.34093.1.2.11.2.0 get/set
text (16 chars
max.)
e.g. psw1234