Eldes ELAN3-SNMP, Руководство пользователя

Страница: 11 / 18

11 11 EN ELAN3 SNMP Ethernet Controller
5.1.4. SNMP
This section is intended for SNMP security authorization, device-related information, trap destination IP address and SNMP status (ena-
bled/disabled) configuration.
9
Get/set Community – Password for authorization to read and write SNMP parameters from/to the device. Default value is public .
sysDescriptor – General description of the device. Default value is Inputs monitoring via SNMP.
sysContact – The name of person or company whom user can contact if technical support is required. Default value is ELDES .
sysName – Several name of device. Default value is ELAN .
sysLocation – The name of location where ELAN3-SNMP device is installed. Default value is Vilnius .
Trap destination1 – IP address of the 1st trap message destination. Default value is 192.168.1.100 .
Trap destination2 – IP address of the 2nd trap message destination. Default value is 0.0.0.0 .
Trap destination3 – IP address of the 3rd trap message destination. Default value is 0.0.0.0.
SNMP – Simple-Network-Management-Protocol:
• OFF – SNMP enabled. Default parameter.
• ON – SNMP disabled.
ATTENTION: In order to send and receive the trap messages to/from the device, SNMP must be selected as ON.
NOTE: The device will accept a trap message from any IP address, if the trap message contains a valid Get/set Community value.
5.1.5. Inputs
The following section is intended for input configuration.
10
Mode
•
Digital – The device measures the input voltage resulting in input state (violated/restored) change in accordance with the Thresh-
old parameter and trap message delivery to the destination IP address (-es) of SNMP Manager softwaare.
• Analog – The device measures the input voltage resulting in voltage value inclusion in the trap message. The value will be in-
cluded in the trap message delivered to the destination IP address (-es) of SNMP Manager software in case of voltage decrease or
increase in accordance with the Delta parameter.
• Off – Input disabled.