manualshive.com logo in svg

elddis XPLORE, Руководство пользователя

Поделиться
Скачать
elddis XPLORE Скачать руководство пользователя страница 46

8-13

HOW TO USE YOUR CARAVAN’S EQUIPMENT

Gas & Electric Operation

For maximum heat output, the Space Heater
can be operated on Gas and Electric
together. This gives a total heat output of
4kW.

To select Gas and Electric; press the space
heater function button        until the  ‘Gas and

Electric’ icon is illuminated.

Switching the Appliance Off

To turn the Space Heater off; press the space
heater function button       until the ‘Off’ icon
is illuminated.

Adjusting the Temperature

To adjust the temperature, press

        or

The temperature is indicated by the
temperature bar.

The Space Heater will automatically turn
itself on and off to maintain the select
temperature.

The Space Heater will continue to run for 3
minutes after it has been switched off. This is
to ensure that all gas is purged from the
system

Frost Protection

A frost protection setting is available. This
maintains a low temperature throughout your
vehicle in cold weather.

To activate Frost Protection; select 500W or
Gas Only.

Then press        to move the temperature

light above the ‘Frost Protection’ icon.

Night Time Setting

When using the Space Heater at night time,
Whale recommends that you select 500W
and set the temperature light to above the
‘Moon’ icon

Maintenance

The outside of the Space Heater does not
normally require cleaning. If the surface
needs cleaned, you must isolate the electric
supplies and wipe down with a soft, damp
cloth only. Do not use abrasive cleaning
agents. Allow to fully dry before reconnecting
the electrical supplies.

Servicing

Whale recommends that the Water Heater
must be inspected, at least annually by a
Whale Approved Service Centre or Engineer.
This must be in accordance with the practice
in the country where it is used and according
to the Whale Instructions (provided
separately). Annual testing of the gas
soundness and combustion must be carried
out by an accredited LPG Gas Engineer. The
Space Heater contains ESD sensitive
components and must only be opened by a
Whale Approved Service Centre or Engineer.

Winterising

When using the Space Heater in winter, you
must ensure that the Flues are not blocked
by fallen leaves or snow etc. When the
Space Heater will not be used for a long
period of time, e.g. in winter storage, you
must cover the open end of the combustion
air and exhaust flue to prevent ingress of
leaves etc.

Содержание XPLORE







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды