Eldat TRS06-01, Инструкция по монтажу и эксплуатации

Страница: 8 / 15

Programming
function User Action Controller Response
Teaching the
controller a
new user tag 1. Present the master
tag to the reader for
approx. 5 seconds.
The controller responds with
a single beep. After a few
seconds the controller
responds with an additional 3
beeps indicating that it has
entered the user tag learning
mode:
2. Remove the master
tag and present the
new user tag(s) to
be learned one at a
time to the reader.
Wait for response of
the controller.
1 second after presenting a
new user tag, the controller
will respond with a single
beep. This indicates that the
controller has learned the
new user tag.
Note: Should the controller
respond with 3 beeps
instead, it is indicating that
the 1000 user limit has
been exceeded and that
the controller has exited
user tag learning mode.
3.2 User Tag Programming Instructions
8