Eldat TRS06-01, Инструкция по монтажу и эксплуатации

Страница: 7 / 15

3.1 Master Tag Programming Instructions
Only one transponder card can be used as master card. Only this card enables
programming and deleting tags.
Please keep your master tag in a safe place!
On presenting a new master tag the entire memory will be deleted and
all user tags will have to be reprogrammed!
Programming
Function User Action Controller Response
Teaching the
controller a
new master tag 1. Press & hold button
S1 (the top button).
The controller display
changes to the last card read
while pressing this button in
standard mode.
2. While still holding
button S1 press
button S2 (the
bottom button)
The controller will respond
with three beeps
immediately. After releasing
buttons S1 and S2 the
controller display will light up
displaying:
This indicates that the
controller is in master tag
learning mode and that the
first tag to be presented to
the reader will be the new
mastertag.
3. Present the new tag
to the reader
(this will become the
new master tag)
The controller will respond
with 3 beeps. This indicates
that it has learned the new
master tag and exited master
tag learning mode. The
controller is now ready for
standard operation.
7