ELCOM Uniq PC 190, Руководство пользователя

Страница: 49 / 55

MOUNTING VARIANTS OF THE UNIQ PC
Uniq PC is manufactured and supplied in different variants that are adapted to different variations of the
location and mounting. With numerous possibilities for attachment, Uniq PC can be placed and used in
virtually any environment while maintaining ergonomy of the work.
Mounting variant consists of Uniq PC fitted with mount (which may include joint) suitable for connection to
the type of stand and the stand itself, which may consist of several segments and include joints and sliding
segments for position adjustment of the mounted Uniq PC.
Mounts
According to the configuration, Uniq PC is equipped with one of the two mounts. Mouniting fixture allows to
attach Uniq PC to a stand that fits your needs.
Muont with joint
Mount with joint is an attachment option, which, thanks to built–in joint with waterproof collar, allows flexible
adjustment of the display tilt in four directions (up–down and left–right). Adjustment is possible in steps of
15° (the position is stable in these points) This fixture is designed primarily for mounting on a pole stand
and allows to lead the cables for connecting peripherals through the centre of the mount into the tube of the
stand. This variant can also be attached to a VESA stand using special adapter.
VESA mount
VESA is a standardized method of attachment suitable for various devices. Thanks to its high prevalence and
standardization there is a wide range of different stands available, that can be used in various environments in
order to ensure easy access to connected devices. VESA mount itself does not allow to change the position
of Uniq PC, all position adjustment options are dependent on a stand.
Stands
Pole stands
Tube stands are sturdy and solid solution with intelligent design and protected cables. They can be ordered
in various lengths (500 mm, 1300 mm)
and angular designs (straight, with a tilt of 15°, 30°, 45°)
Cables are led inside the metal tube rack and this design provides a high degree of ingress protection IP 54
The stand is fixed with four screws to the table or other object. For the mounting of the tube to the ceiling it
is necessary to reposition the monitor on the tube rotating its holder by 180 °, if Uniq PC is not equipped
with handle joint.
Figure 13.1. Placement of joint variant on a tube
49
Mounting and care