ELCOM Uniq PC 190, Руководство пользователя

Страница: 46 / 55

Rotating the image by 180°
If the device is mounted with the display rotated by 90° or 180° it is also essential to set the desktop
rotation properly.
To set the rotation of the displayed image press and hold the panel on the desktop until local menu appears
(mouse right–click). Then select “Graphics Properties”. A window opens with the settings, choose the category
“General settings” and set the “Rotation” to a proper value. Confirm by pressing OK or Apply.
Figure 12.6. Rotating the image by 180°
Note : In Windows 7 portion of the settings included in the driver (such as display rotation) is also available from
standard system dialogs. It doesn’t matter where you change the settings, parameters are system–wide.
WIRELESS CONNECTIONS
If your Uniq PC contains optional WiFi and/or Bluetooth components, you can use them to communicate with
other devices supporting these wireless standards. You need to use either built–in operating system functions
or special utilities (supplied by communication device vendor together with the driver or by a third party)
to create and use connections. Please refer to your operating system or respective device documentation.
CONNECTING AND DISCONNECTING A USB DEVICE
When connecting any equipment to the Uniq PC observe the manufacturer’s instructions for the given device.
After connection of a USB device to a Uniq PC port, the operating system detects it and if it has a driver
available for the device, it will load the driver and the device can then be used. If a driver is not automatically
available, it is necessary to search for one and install it. Drivers are usually located on the CD supplied with
the devices or can be downloaded from the Web site of the manufacturer.
If after connecting and using a USB device you want to disconnect, it is a good idea to remove it safely – first
in the operation system (in order that all device operations be completed) and then after notification of the
operating system to physically pull out the device’s connector. The procedure for safe removal of a device
depends on the operating system used. Connecting and disconnecting USB devices when the Uniq PC is
switched off is always safe.
Note : Not all equipment allows for safe removal of hardware. Safe removal makes sense mainly with equipment
which stores data (hard disks, USB memory sticks) and which also use the write buffer. Equipment which is
not shown on the list of equipment that can be safely removed can be disconnected without the procedure
for safe removal.
46
Using the device