ELCOM Euro-2000T Alpha, Руководство пользователя

Страница: 63 / 81

© Elcom s.r.o. Euro-2000T Program manual
63
8.3. Correction of the tax program
To correct tax program values, turn the mode key to the „P“ position. Enter number of the tax
level you want to edit and press the
I
(REFUND) button. Reprogram the parameters as in the case of tax
programming (chapter 8).
8.4. Printing of preprogrammed tax values
Verify preprogrammed values by printing them. Press the
Q
(CHECK) button in the tax programming mode.
If working in another programming mode, press the
I
(REFUND) button and then the
Q
(CHECK) button.
8.2. Programming of the tax name
After finishing tax rate programming “
0I 445048
” appears in the display. The left digits designate the tax
level number and the right ones the data area for the tax name programming (VAT 6%, VAT 25%, TAX 6%
etc.). The name of the tax level can contain up to 10 characters of standard size.
Enter the hexadecimal character codes, that can be found in the alphabetic and hexadecimal character table
and press the
V
(SUBTOTAL) button. After pressing the button, continue by programming the next tax
levels.
Check programmed values by printing them. Press the
Q
(CHECK) button in the tax programming mode.
The programming of taxes will be finished by pressing the
W
(TOTAL) button.
N
01 41
VAT 1
Display :
Name programming name for tax level 1.
Programmed Taxes
1. Tax Rate :
6.00%
1. Tax Name :
VAT 6%
2. Tax Rate :
23.00%
2. Tax Name :
VAT 23%
3. Tax Rate :
0.00%
3. Tax Name :
VAT 3
..