ELCOM Euro-2000T Alpha Скачать руководство пользователя страница 18

Страница: 18 / 81

Euro-2000T User manual

6. Before you start a day.

6.2. Printing modes.

6.1. Recommended procedures for manager at the beginning of the day :

1. Check if there is enough paper roll in the printer for the day. Insert a new paper roll, if neces-

sary.

2. Print out the X report and make sure that date and time values are correct.
3. Check, whether there is enough cash in drawer.
4. Register the initial cash put into the drawer by means of

(RA)

button.

Electronic Cash Register Euro-2000T allows choosing printing mode according to two basic criterions:

1. Printing speed
2. Power consumption

Two character fonts are included in Euro-2000T : small and normal. The small font is used in case of no

external power source is connected to Cash register (adaptor, battery box atc.). Normal font is used if

external power source is connected to ECR.
If the ECR is powered just from internal lead-acid accumulator, user can choose one from three printing

modes with small character font.

Normal

- normal printing saturation, normal power consumption. This mode is set as default.

Economical

- the printing saturation is a little bit lower than normal one. The printing speed is

little bit higher than normal one. The lowest power consumption in this mode. This mode takes

advantage if ECR should work with no external power supply as long as possible.
3.

High speed

- the printing saturation is a little bit lower that normal one. The printing speed is

much higher than normal one. The highest power consumption. This mode takes advantage if

sales cadence is high. The discharging of internal lead-acid accumulator is much higher than

in normal mode, so that the ECR can work without external power supply less time than in

normal mode (according to the same number of receipts).

If the ECR is powered from external power source, user can choose one from three printing modes with

normal character font.

Normal

- normal printing saturation, normal power consumption. This mode is set as default.

Economical

- normal printing saturation. The printing speed is lower than in normal mode. The

lowest power consumption. This mode takes advantage if you need to use ECR and you need

to charge the internal lead-acid accumulator at the same time.
3.

High speed

- the printing saturation is a little bit lower than normal one. The printing speed is

much higher than normal one. Lower power consumption than normal one. This mode takes

advantage if sales cadence is high.

Note : Programing of system flag 15. sets the printing modes.

Содержание Euro-2000T Alpha


















































































Результаты поиска

Содержание Euro-2000T Alpha

Отзывы:

Похожие инструкции для Euro-2000T Alpha

Бренды по названию

Популярные бренды

ELCOM Euro-2000T Alpha, Руководство пользователя

Результаты поиска

Содержание Euro-2000T Alpha

Отзывы:

Похожие инструкции для Euro-2000T Alpha

Бренды по названию

Популярные бренды