elco RENDAMAX 30, Руководство по эксплуатации

Страница: 5 / 28

Product description
Components
Function description
Extent of delivery
1 Smoke gas exhaust connection
2 Air infeed
3 Smoke gas temperature sensor
4 Heat exchanger
5 Ignition transformer
6 Blower
7 Regulator
8
On / off switch
9 Automatic ventilator
10 Noise insulation (types 65 and 85)
11 Gas
valve
12 Venturi tube
13 Boiler pump (outside the boiler on
types 100 and 120)
Product description
The burner RENDAMAX 30 is certified
with CE-0063BO3192 and therefore
corresponds to the following standards
and guidelines:
-
DIN EN 677
- EN 60 335
- EN 55 014-1/2
- 90/396/EWG
- 89/336/EWG
- 73/23/EWG
- 92/42/EWG
-
DIN EN 483
- DIN EN 297
- DIN EN 656
- The NOx limits required by 1
st
BlmSchV Section 7 (2) are met.
The burner RENDAMAX 30 is a system
with a closed combustion chamber
which is independent of ambient air.
The combustion air enters the device
through an air infeed system. The
burner is used for closed hot water
heating systems. The boiler output is
modulated to the current heating
requirements by the integrated
regulator.
Heat exchanger
The stainless steel heat exchanger is
made from flat spirals and ensures a
transfer of the exhaust gas’s heat to
the boiler water.
The condensation takes place in the
upper section of the heat exchanger.
The condensation is fed down in the
rear section of the heat exchanger.
The control and regulator unit
assumes the function of the automatic
firing device and regulator of the
modulating operation of the boiler and
the hot water preparation. A display
shows the operating status of the
boiler.
The automatic firing device controls
and monitors the safety function
process.
Extent of the delivery
x
Burner with circuit diagram
x
Documentation
Accessories
x
VISTRON tank
x
Flue systems
x
Neutralisation unit / condensation
treatment
x
Pump group
1
2
3
4
5
6
7
8
9
10
11
12
13
5