3. Panel description
1. Humidity & Temperature
Humidity sensor ad semiconductor sensor inside for indoor.
2. LCD Display
3 4/5 digits LCD display
3. Function switch
4. V / Hz% /
Ω
/ CAP / °C input jack
5. COM input jack
6. µA / mA input jack
7- 10A input jack
8. Microphone
Electric condenser microphone inside.
9. Photo Detector
Long life silicon photo diode inside.
10. Hz/% button
The button at AC/DC Voltage measurement and AC/DC Current measurement
and Hz% measurement. Function is availability.
11 . HOLD button
The HOLD function allows the meter to "freeze" a measurement for later
reference. Press the HOLD button to "freeze" the reading on the indicator. The
"HOLD" message will be appear in the display.
1 2. BACKLIGHT button
Press the backlight button for LCD light, again Press the backlight button to
exit light mode.
13. MODE button
The button to select AC or DC measurement when in A, mA, uA, and
Ω
, ,
ranges.
14. RANGE button
The button to select AC or DC measurement when in Voltage,
Ω
ranges.
15. REL button
•The relative measurement feature allows you to make measurements relative
to a stored reference value. A reference voltage, current, Capacitor, etc. can
be stored and measurements made in comparison to that value. The
displayed value is the difference between the reference value and the
measured value.
• Perform the measurement as described in the operating instructions.
• Press the REL button to store the reading in the display and the "REL"
indicator will appear on the display.
•The display will now indicate the difference between the stored value and the
measured value.
•Press the REL button to exit the relative mode.
16. NCV indicate lamp
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. ++39(0)2/25.11.73.10 Fax ++39(0)2/25.11.76.10 sito internet: www.elcart.com e-mail: [email protected]
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
