REBLE610 Fully indoor Microwave Link
Page 12 of 52
Version 1.4
7.1
Main menu.
At equipment switch on, after embedded software boot, display shows the main menu, according to the
configuration, as can be seen in Figure 3, Figure 4 and Figure 5.
This menu shows the equipment block diagram, for an easy and intuitive access to modules parameters
according to their function; on every active area, one or more circles symbolizing alarm led are shown,
eventually red or green depending on the status of the related block.
Figure 3
:
Main menu FD.
Figure 4
:
Main menu Tx.
Figure 5
:
Main menu Rx.
Active areas:
Rx
Tx
Modem uC
I/O
uP
PS
Bus
7.2
Summary menu.
Summary menu reports the most important information for a fast check of the equipment functioning;
indeed following measurements and indications are shown:
Equipment
Power out
(FD and Tx)
RSSI Received Signal Strength Indication
(FD and Rx)
MSE
Mean Square Error
(FD and Rx)
Modulator locking status
Timing Loop
(FD and Tx)
Demodulator locking status
Dem Lock
(FD and Rx)
Figure 6: Summary menu FD.
Active areas:
Directional arrow “UP”
to go back to main menu.
