REBLE610 Fully indoor Microwave Link
Page 52 of 52
Version 1.4
9.2
Back Panel.
Figure 98: REBLE610 back panel.
Item
Description
Function
1
UBR120 Flange
Transmitter RF output (model REBLE610/10).
2
UBR120 Flange
Receiver RF input (model REBLE610/10).
3
Connector BNC 75 Ohm
In/out ASI A (software configuration).
4
Connector BNC 75 Ohm
In/out ASI B (software configuration).
5
Connector BNC 75 Ohm
In/out ASI C (software configuration).
6
Connector BNC 75 Ohm
In/out ASI D (software configuration).
7
Connector BNC 75 Ohm
In/out ASI E/E1 IN (software configuration).
8
Connector BNC 75 Ohm
In/out ASI F (software configuration).
9
Connector BNC 75 Ohm
In/out ASI G (software configuration).
10
Connector BNC 75 Ohm
In/out ASI H (software configuration).
11
Connector BNC 75 Ohm
In/out ASI J (software configuration).
12
Connector BNC 75 Ohm
In/out ASI K/E1 OUT (software configuration).
13
Connector RJ-45
Link for 1+1 configuration with paired REBLE610 for space diversity,
frequency diversity and hot-standby.
14
Connector RJ-45
Baseband data transit between a receiving terminal and a transmitting
terminal (software configuration).
15
Connector RJ-45
Ethernet 10/100/1000 “Gigabit Ethernet” for data transport.
16
Connector RJ-45
Link for XPIC configuration with paired REBLE610 (hw configuration) for
exchange of data received and demodulated from different polarization
than used, for opportune cancelling.
17
PSU
Backup Power supply, AC or DC; in Figure 98 the DC input model is shown.
Hot swappable.
18
2 pin connector
Batteries connection, independent on polarity.
19
PSU
Main Power supply, AC or DC; in Figure 98 the AC input model is shown. Hot
swappable.
20
Plug IEC320
AC supply plug.
