45
REPLACEMENT OF THE INJEC-
TORS OF THE COOKTOP BUR-
NERS
To replace the injectors proceed as follows:
•
Remove pan supports and burners
from the cooktop.
•
Using a wrench, substitute the nozzle
injectors “
J
” (figs. 8.4, 8.5) with those
most suitable for the kind of gas for
which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
REPLACEMENT OF THE INJEC-
TORS OF THE BURNERS
If the injectors are not supplied they can
be obtained from the “Service Centre”.
Select the injectors to be replaced accor-
ding to the “Table for the choice of the
injectors”.
F
J
Fig. 8.4
Fig. 8.6
ADJUSTING OF THE MINIMUM OF
THE COOKTOP BURNERS
In the minimum position the flame must
have a length of about 4 mm and must re-
main lit even with a quick turn from the ma-
ximum position to that of minimum.
The flame adjustment is done in the fol
-
lowing way:
•
Turn on the burner.
•
Turn the tap to the MINIMUM position.
•
Take off the knob.
•
With a thin screwdriver turn the screw
“
F
” until adjustment is correct (fig. 8.6).
Normally for LPG (G30/G31), tighten up
the regulation screw.
J
Fig. 8.5
Auxiliary and
Semi-rapid
burners
Triple-ring
burner
Содержание 9S DX 838
Страница 2: ...2...
Страница 22: ...22 S F C T Fig 6 1 Fig 6 2 A B T S Fig 6 3 Fig 6 4 Fig 6 5...
