w w w . e l a t i o n l i g h t i n g . c o m
22
PLATINUM PROFILE LED™ User Manual Ver 1
PERSONALITY - Status Settings – Hibernation
Select desired Hibernation time.
PERSONALITY – Service Setting - Password
Display the fixture timer password.
(050)
NOTE
: The Service Password MUST be entered in order to access the following menus:
RDM PID, Ethernet IP, Ether IP Mask,
and
Clear Err. Info
.
PERSONALITY – Service Setting - RDM PID
Select various submenus via RDM.
RDM stands for "Remote Device Management", which provides the ability to control
the device remotely while connected to a DMX-bus. ANSI E1.20-2006 by ESTA
specifies the RDM standard as an extension of the DMX512 protocol. Manual settings
like adjusting the DMX starting address are no longer needed. This is especially useful
when the device is installed in a remote area.
RDM ready and conventional DMX devices can be operated in one DMX line. The
RDM protocol sends its own packages in the DMX512 data feed and does not
influence conventional devices. If DMX splitters are used and RDM control is to be
used, these splitters must support RDM. The number and type of RDM parameters
depend on the RDM controller being used.
PERSONALITY – Service Setting - Ethernet IP
Enter the Ethernet IP address of the fixture.
PERSONALITY – Service Setting - Ether IP Mask
Enter the Ethernet Subnet Mask IP address of the fixture.
PERSONALITY – Service Setting - Clear Err. Info
Clear Error info of the fixture.
PERSONALITY – Fans Control
Select desired Fan setting.
PERSONALITY - Display Setting – Shutoff Time
Define how many minutes before the LCD Menu display will automatically shut OFF.
PERSONALITY - Display Setting –
Display Reverse
When ON, the LCD Menu display by is rotated (inverted) 180°.
PERSONALITY - Display Setting –
Key Lock
When ON, Control Panel buttons lock automatically after exiting main menu for 15
seconds. To unlock, keep
MODE/ESC
button pressed for 3 seconds.
