Elation PIXEL BAR 120IP, Руководство пользователя

Страница: 12 / 26

www.elationlighting.com
12
I N S T A L L A T I O N G U I D E L I N E S
TRUSS MOUNTING
The fixture can be attached to truss or a like structure via the mounting yoke using an
appropriated truss clamp (not included) and an M10 screw (not included).
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the fixture. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.
INSTALLATION LOCATION PLANNING
Use careful planning to select installation locations of PIXEL BAR IP unit(s). The maximum
distance from the
PIXEL DRIVER 4000
to the first pixel bar can NOT exceed
50 feet (18m)
.
END-TO-END ALIGNMENT
The fixture includes magnetic end caps on both sides which allows seamless end-to-end
linear alignment of multiple units. (see image below) Each fixture MUST be securely
attached/installed using one of the methods mentioned above.
THIS FEATURE IS FOR ALIGNMENT PURPOSES ONLY!
SAFETY CABLE
RIGGING POINT
S A F E T Y C A B L E
ALWAYS ATTACH A SAFETY CABLE WHENEVER
INSTALLING THIS DEVICE IN A
SUSPENDED ENVIRONMENT TO ENSURE THE
FIXTURE WILL NOT DROP IF THE CLAMP FAILS.