Elation PIXEL BAR 120IP, Руководство пользователя

Страница: 7 / 26

7
www.elationlighting.com
S A F E T Y G U I D E L I N E S
DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow
approximately 15 minutes for the fixture to cool down before serving.
DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
DO NOT operate fixture if the power/data cables are frayed, crimped, damaged and/or if
any of the connectors are damaged and do not insert into the fixture securely with ease.
NEVER
force a power/data cable connector into the fixture. If the power/data cable or any
of its connectors are damaged, replace it immediately with a new one.
DO NOT
block the air value on the bottom of the fixture.
This must remain clean and never blocked.
When installing fixture in a suspended environment, always use mounting hardware that is no
less than M10 x 25 mm, and always install fixture with an appropriately rated safety cable.
ALWAYS disconnect fixture from main power source before performing any type of service
and/or cleaning procedure.
NEVER pull out the power/data cable by tugging the wire portion of the cable.
Consistent operational breaks will ensure the fixture will function properly for many years.
ONLY Use the original packaging and materials to transport the fixture in for service.