Elation DTW BAR 1000, Руководство пользователя

Страница: 11 / 34

11
I N S T A L L A T I O N I N S T R U C T I O N S
CLAMP MOUNTING
The fixture includes an integrated dual yoke bracket. When mounting this fixture to truss be
sure to secure an appropriately rated clamp (not included) to one of the mounting holes.
Be sure to attach a
Safety Cable
to the fixture using the safety cable rigging point
integrated into the back of the fixture. (See image below)
ALWAYS ATTACH A SAFETY CABLE WHEN INSTALLING FIXTURE IN A SUSPENDED
ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT DROP IF THE CLAMP FAILS.
SAFETY CABLE RIGGING POINT
OVERHEAD RIGGING
Overhead rigging requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the fixture. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury and property damage.
Fixture is fully operational in the specific mounting positions illustrated below.
POWER LINKING
USE CAUTION WHEN POWER LINKING OTHER MODEL FIXTURES AS THE
POWER CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX
POWER OUTPUT ON THIS FIXTURE. CHECK SILK SCREEN FOR AMX AMPS.
KLING-NET / ART-NET CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit
Ethernet Switch that supports IGMP (Internet Group Management Protocol) is required.
Using a Gigabit Ethernet Switch that does not support IGMP can cause erratic behavior
of all connected devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol