Elation DESIGN SPOT 575E, Инструкция пользователя

Страница: 28 / 48

Design Wash 575E™
©Elation Professional® 28 Design Wash 575E™
8.5 Reset Functions:
1. Reset All: This function will reset all internal motors to the home position.
2. Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
3. Reset Colors: This function will only reset the color wheel and the CMY filter motors
to the home position.
4. Reset Shutter: This function will only reset the blackout shutter to the home
position.
5. Reset Others: This function will reset all other motors to the home position.
8.6 EFFECT Adjust:
9.6.1 Test Channel – This menu function allows the user to select each individual
fixture channel and test it’s function independently from the control board.
9.6.2 Lamp adjustment (manual control) – This function readies the fixture for lamp
optimization in a simple single step procedure. This function will center the pan
and tilt motors while at the same time open the shutter and bring the dimmer to
100%. The pan and tilt function will still operate if the fixture needs to be
positioned to a flat clear surface.
9.6.3 Calibrate values – This function should only be used by a qualified technician.
This function allows a user to make small adjustments to the effect wheels (color,
gobo, shutter, etc) to compensate for ware or in the event a sensor has been
knocked slightly out of place. Because improper use of this function can result in
undesired operation this function has been password protected. The password is
050 and must be entered each time the calibration menu function is entered.
8.7 USER MODE:
8.7.1 User mode – This function allows the user to create user defined channel orders.
This will allow the fixture to match the channel order of other fixtures on the
market for easier operation.
8.7.2 Edit User mode – This function allows the user to make the actual changes in
the user defined modes that are accessed through the previous function.