Elation DESIGN SPOT 575E, Инструкция пользователя

Страница: 29 / 48

Design Wash 575E™
©Elation Professional® 29 Design Wash 575E™
8.8 EDIT PROGRAM:
8.8.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in “Function Mode”
under “Program Run.”
8.8.2 Edit program – This function allows the user to edit the built-in programs.
8.8.3 Edit Scenes – This function allows the user to edit or define the actual scenes
that are stored in the user defined built-in programs that are accessed in the
previous step.
8.8.4 Rec Controller - The Design Wash 575E features an integrated DMX recorder
by pre-programmed scenes can be transmitted to the fixture via any standard
DMX controller. This function allows those scenes to be stored in to the fixture’s
built-in memory and then subsequently used to create user defined programs.
9. OPERATION
Operating Modes : The Design Wash 575E™ can operate in three different modes. This
next section will detail the differences in the operating modes.
• Stand-alone mode - The fixture will react to sound, chasing through the built-in programs.
• Master/Slave mode - You can daisy chain up to 16 fixtures together to get a synchronized
light show without the need of an external controller. The fixtures will react to sound chasing
to synchronized light show.
• DMX control mode - This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation® Show Designer 2.
9.1 Universal DMX Control: This function allows you to use a universal DMX-512
controller such as the Elation® Show Designer 2™ or Elation® Show Designer 3™ to