E L A N H O M E S Y S T E M S
Page 64 © ELAN Home Systems 2009 • All rights reserved.
DT22-240
INSTALLATION MANUAL
Function:
Query current preset of the desired tuner.
This response will also be sent as unsolicited feedback.
Response:
*DT,R1,PRESET,15<cr> (Tuned to preset 15 in current group)
or
*DT,R1,PRESET,0<cr> (Not tuned to a preset now)
Command:
&DT,
dd
,PRESET,
mm
<cr>
dd
= ST, R1, R2
mm
= 1 - 99
Function:
Tunes to preset
mm
.
Command:
&DT,
dd
,PRESET,SAVE<cr>
dd
= ST, R1, R2
Function:
Begins saving the current station to a preset.
&DT,R1,PRESET,SAVE<cr> Preset number is specified using the
DIGIT
and
ENTER
command.
&DT,R1,DIGIT,1<cr>
&DT,R1,DIGIT,0<cr>
&DT,R1,ENTER<cr>
Current station is saved to current group's preset 10.
If two digits are given,
ENTER
is not required.
&DT,R1,PRESET,SAVE<cr>
&DT,R1,DIGIT,1<cr>
&DT,R1,DIGIT,7<cr>
Current station is saved to current group's preset 17.
Sending
ENTER
without any digits will save to the first open preset.
&DT,R1,PRESET,SAVE<cr>
&DT,R1,ENTER<cr>
Timeout is 5 seconds. Preset WILL be saved in case of timeout.
&DT,R1,PRESET,SAVE<cr>
&DT,R1,DIGIT,3<cr>
Wait 5 seconds...
Current station is saved to current group's Preset 3.
Send CANCEL or any other command to prevent saving of preset.
&DT,R1,PRESET,SAVE<cr>
