E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved. Page 11
DT22-240
INSTALLATION MANUAL
Rack Mounting
When mounting the DT22-240 Tuner in an equipment rack, use the included Rack Mount
Brackets for secure mounting and proper ventilation. The DT22-240 requires two rack spaces.
To install the DT22-240 into a standard 19” equipment rack:
1. Slide the rack mount bracket onto the DT22-240 chassis from the front as shown in
Figure
C-1
.
Figure C-1
2. Ensure that the brackets are flush with the front of the unit. Install each of the eight screws
(included) through the side mounting flanges into the holes in the sides of the unit as shown in
Figure C-2
. Hand tighten screws! Over-tightening could cause damage to the DT22-240 Tuner.
Figure C-2
3. Once the brackets are securely mounted, install the entire assembly into a standard 19”
equipment rack from the front using four rack screws (not included). Two rack spaces will be
used. See
Figure C-3
.
19" Equipment Rack
Rack Screws
Figure C-3
