E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved. Page 59
DT22-240
INSTALLATION MANUAL
UnitID
Command:
&DT,CH,CONFIG,UNITID,
x
<cr>
x
= 1, 2
Function:
Sets the unit ID of the DT22.
DT22 must be rebooted for change to take effect.
Query:
&DT,CH,CONFIG,UNITID,?<cr>
Function:
Queries the current ID of the DT22.
Response:
*DT,CH,CONFIG,UNITID,1<cr>
or
*DT,CH,CONFIG,UNITID,2<cr>
Config RS232 Unsolicited Feedback On/Off
Command:
&DT,CH,CONFIG,RS232,UFB,ON<cr>
Function:
Sets
DEFAULT
state of unsolicited feedback to the RS232 port to on.
Whenever power is turned off and on, unsolicited data is set to
On
if this command was sent to
the
DT22
prior to turning off.
Use
UFB On/Off
command if unsolicited data needs to be changed during operation.
Unsolicited feedback is always
On
for Ethernet by default.
Command:
&DT,CH,CONFIG,RS232,UFB,OFF<cr>
Function:
Sets
DEFAULT
state of unsolicited feedback to the RS232 port to off.
Whenever power is turned off and on, unsolicited data is set to
Off
if this command was sent to
the
DT22
prior to turning off.
Use
UFB On/Off
command if unsolicited data needs to be changed during operation.
Unsolicited feedback is always
On
for Ethernet by default.
Query:
&DT,CH,CONFIG,RS232,UFB,?<cr>