ELAC AM 200, Руководство по эксплуатации, Страница: 19 / 24

Connection and getting started 16
8.
Mains fuse: In the lower part of the mains inlet there is a drawer which contains the mains fuse.
This drawer is already equipped with a fuse which fits to the mains voltage of your local energy
provider. If you would like to connect the speaker to a different mains voltage, the voltage selector
switch (9) has to be switched to the appropriate mains voltage and the mains fuse has possibly to
be adapted. This has to be carried out by a technician.
9.
Voltage selector switch: By means of this switch the appropriate mains voltage can be selected.
The default value is already corresponding to the mains voltage which is provided by your local
energy provider and should not be changed.
10.
Mains inlet: In the upper part of the mains inlet the female plug of the power cord (“E”) will be
plugged-in. The mains plug then should be plugged into an available mains receptacle.
11.
Mains switch: If all necessary connections are done, finally the mains switch can be switched on.
A blue LED at the front of the speaker will signalize that the speaker is working properly.
Note: If you want to disconnect the AM 200 all-phase from the mains, you have to pull out the
mains plug.