/ 24 /
CONNECTING THE TUBING
If you are expanding your loop with additional liquid
cooling components please proceed to Page 31,
chapter POSSIBILITIES OF EXPANDING THE
SYSTEM.
STEP 1
In order to successfully route the tubing it is recommended
that you check the water cooling scheme on the right picture.
It is best that the water block receives the coldest fl uid as pos-
sible, therefore you should connect the radiator’s outlet port
with the water block’s inlet port. This is best practice but it is
not mandatory.
CPU Waterblock
Pump
Radiator
with Fans
COLD AIR
HOT AIR
STEP 1
STEP 2
Visualize the tube’s routes and then measure the distance by
trying to fi t it into the chassis. Mark the required length with a
marker. Before cutting it is recommended that you leave an
additional 2 or 3 centimeters to spare. You can shorten it af-
terwards.
Please make sure that the tube is not bent or
twisted. This way the coolant will be able to fl ow
without restriction.
STEP 2
PC Chassis
Tubing
Pump unit
Reservoir
