And fill in whole content (100mL) of the water
additive concentrate
Open top of the reservoir.
Fill in the ready liquid about 1 cm from the top
Turn on the power supply
Fill up the liquid while the pump is running and stop
when the water level reaches 2 cm under the edge
Alternately turn off and on (cycle) power supply in few
second intervals to speed up air bleeding process.
Close the reservoir by screwing in the top acetal
endcap.
Shake and tip the PC case to remove any air possibly trapped in the
radiator. You may need to add more coolant.
Leave your PC case for 24 hour leak
test, to ensure the system is leak
free.
