EKOM DK50 9x4VRT/M, Руководство пользователя

Страница: 31 / 45

DK50 9x4VRT/M
10/2018 NP-DK50-9x4VRTM_ED-EN-2_10-2018
- 31-
62353, Annex G) together with the
measurement methods.
The equipment has been constructed and
produced to keep maintenance to a minimum.
The following work shall be completed to
ensure the full and reliable operation of the
compressor.
Before starting compressor
maintenance work, check to
ensure the compressor is
disconnected from the appliance
to ensure the person using the
appliance is not at risk and there is
no risk of any other material
damages!
Air pump components (head,
cylinder and pressure hose) are
very hot when the compressor is
running and just after it shuts
down – do not touch these
components!
Repair works beyond normal
maintenance can be performed
only by qualified personnel or he
manufacturer’s customer service.
Use
only spare parts and
accessories approved by the
manufacturer.
PROTECT EYESIGHT, WEAR
GOGGLES, WHEN VENTING
COMPRESSED AIR FROM THE
COMPRESSED AIR CIRCUIT (AIR
TANK).
Only trained professionals may perform this
work as follows:
BEFORE BEGINNING ANY OF THE
FOLLOWING
MAINTENANCE
WORK, SWITCH OFF THE MAIN
SWITCH ON THE SIDE OF THE
SWITCHBOARD TO POSITION "0“.