EKOM DK50-10 S, Руководство пользователя

Страница: 18 / 276

DK50-10
NP-DK50-10-16_01-2022-MD - 18 - 01/2022
For the membrane dryer to work as intended, the dryer is connected directly to the air tank without
the use of a check valve. As the membrane dryer contains selective membrane fibres, there is a
small amount of air leakage through them (about 0.5 bar/30 min)
This is why there is a gradual, slow drop in pressure even when there is no demand for compressed
air (from the air tank), however, this is not a malfunction.
The pressure vessel does not need to be drained.
Compressor cabinet
The soundproof cabinet provides compact covering of the compressor, allowing sufficient exchange
of cooling air. With its design It can be placed in a dentist’s office as a part of furniture. The fan under
the air pump of a compressor provides cooling of compressor and it is in operation at the same time
with an engine of the compressor. After prolonged use the temperature in the cabinet may rise
above 40°C, causing the cooling fan blower to automatically turn on. After cooling the cabinet area
down to 32
°C the fan blower turns off automatically.
Make sure that nothing impedes the free flow of air under and around the compressor.
Never cover the hot air outlet on the top back side of the cabinet.
If placing the compressor on a soft floor such as carpet, create space for ventilation
between the base and floor or the cabinet and floor, e.g. underpin the footings with
hard pads.
The 8-10 bar compressor model is equipped with an hour counter (Fig. 3).
Fig. 1: DK50-10Z - Kompresor Description for Figures 1 - 3
1 Air pump
2 Air tank
3 Non-return valve
4 Pressure switch
5 Safety valve
6 Pressure gauge
7 Drain valve
8 Inlet filter
9 Dryer
10 -
11 -
12 -
13 Solenoid valve
14 Dryer cooler
15 Filter
16 Condensate drain solenoid valve
17 Compressed air outlet
18 Circuit breaker switch
19 Bottle
20 Magnetic holder
21 Fan
22 Switch
23 Hour counter
24 Socket
25 Cabinet fan