IMPORTANT NOTES
This fire is an Inset Live Fuel Effect Gas Fire providing radiant warmth. It is designed to operate on Natural
Gas only.
It is the LAW that all gas appliances and fittings are installed by a competen
[1]
person and in accordance with
the Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards for Installation, Codes
of Practice and in accordance with the Manufacturers’ Instructions. The installation shall also be carried out
in accordance with the following regulations:
The Building Regulations issued by the Department of the Environment, the Building Standards (Scotland)
(Consolidation) Regulations issued by the Scottish Development Department.
BS 5871 part 2
BS 5440 parts 1 & 2
BS 1251
BS 6891
BS 6461 part 1
Failure to comply with these regulations could lead to prosecution and deem the warranty invalid.
This appliance must be installed in accordance with the rules in force and used only in a sufficiently
ventilated space.
Consult all instructions before installation and use of this appliance.
This appliance is free from any asbestos material. Refractories and coal bed are constructed from
ceramic fibre.
1
Section
1.0
2.0
3.0
4.0
4.1
5.0
6.0
7.0
7.1
8.0
8.1
9.0
10.0
Contents
Important Notes
Appliance Data
Installation Requirements
Site Requirements
Debris Collection Space
Ventilation
Pre Fabricated Flue Boxes
Unpacking the Appliance
Component Checklist
Preparing the Appliance
Fitting the Decorative Frame
Preparing the Opening
Gas Supply Routing
Page No.
1
2
2
3
4
4
4
4
5
5
6
6
6
Section
11.0
11.1
12.0
13.0
14.0
14.1
14.2
14.3
14.4
14.5
14.6
15.0
16.0
Contents
Fitting the Firebox
Installation by Cable Fixing Kit
Fuel Bed Layout
Fitting the Firefront
Testing and Commissioning
Operating the Appliance
Spark Failure
Setting Pressure
Flue Spillage Monitoring System
Testing for Spillage
Briefing the customer
Servicing
Troubleshooting Guide
Page No.
7
7
8
8
8
8
8
8
8
9
9
9
11
Note - For Republic of Ireland, reference
should be made to the relevant standards
governing installation, particularly in regard
to flue sizing and ventilation. See IS813, ICP3,
IS327 and any other rules in force.
1.0
©
2009 Focal Point Fires plc.
[1] GB - Gas Safe
TM
registered operatives (Northern Ireland only- CORGI registered operatives) are the only class of person considered as competent by the HSE under the Gas Safety (Installation and Use)
Regulations 1998.
