EKKO EK13A, Руководство пользователя

Страница: 12 / 28

12
○
3 Such as discontinued for a long time, battery should be added once every 15
day electricity.
3.3 Check before using
3.3.1 New car if there is any damage in transit, please don't be put into use, and
promptly get in touch with the supplier, do proper processing.
3.3.2 New cars in the factory run parts has been filling lubricating oil, hydraulic oil
tank has been listed.
3.3.3 Forklift truck equipped with battery. The battery is charged before leaving
factory. If leaving the factory for a long time, may the battery is low. Before use
should pay attention to electricity meter shows that when the electricity meter display
to the last two warning, must charge at once. Every day before using, or before
charging, should open the battery blocks, check the liquid level height, such as liquid
level is too low to add distilled water in charge.
3.4 Operation specification
Before operating the forklift, please be familiar with the dashboard function of
each switch/button.
3.4.1 Start, run and parking:
○
1 Insert the key into the key switch, turn to the right, the emergency power
safety switch clockwise reset, gently open the control circuit.
○
2 The fork rises from the ground about 10 cm.
○
3 Begin to loosen parking system.
○
4 According to the requirements in the direction of the forward or backward
direction of switches.
○
5 On the accelerating pedal slowly, until the required speed.
○
6 In the process of operation, forklift exception occurs fault, need to quickly cut
off power supply, please press the red emergency power switch.