24
Perform installation in reverse order of above steps. It is noticeable to put the
accumulator in right position and connect the cables securely. After reinstalling the
accumulator, always check all cable connections and connectors for obvious damage.
4.4.7Capacity indicator of the accumulator
Capacity indicator of the accumulator the status of accumulator discharging is
indicated on the indicator with 10 bar graphs, each bar represents 10 percent of
increment. As the consumption of accumulator capacity, the lighting bars will fall
down from the top.
Preset “Warning” marks will appear when remaining capacity of accumulator
meets following conditions: When the remaining capacity of the standard accumulator
is 30 percent, “Warning” mark will appear and you can recharge the accumulator.
Preset “Warning” mark and a flashing “Stop” mark will appear when remaining
capacity of accumulator meets following conditions: When the remaining capacity of
standard accumulator is 20%, “Stop” mark will appear and keep lighting. When the
“Stop “mark keeps lighting, lifting
If the indicator shows low battery when lifting loads for a not very long period,
lifting function can only be performed after recharging the accumulator to at least
70% of capacity.
4.4.8 Recharging
The EK13A series of forklift is supplied with a special charger for recharging.
Содержание EK13A
Страница 2: ...2 Contents...
Страница 4: ...4 EK15A...
Страница 26: ...26 Perform balanced recharging to accumulator once a month in normal use...