20
If above steps still can not solve problems, please contact after-sales service department of the
manufacturer and have the problems solved by specially trained technicians.
5.2 Preparation before repair
To prevent possible accidents during maintenance and repair work, following preparations must be
done:
— Park the device safely.
— Press the emergency stop switch and disconnect the connectors on accumulator.
5.4 Complete repair, the preparation before using
Use the device only after following operations have been completed.
— Clean the device
— Check the brake.
— Check the emergency stop switch.
— Check the horn.
Several electromagnetic brake tests were performed immediately after the test
Electric lock switch on “OFF” position
Electric lock switch turn to “0”position
Emergency Stop Switch not open
Open the Emergency stop switch
Battery power runs out
Check the battery charge
，
If it is
necessary to recharge
The stacker being charge
Interrupt charging process
The fuse is damaged
Check the fuse
A direction moving
Micro switch and cable jumper contact is
not good
Check the micro switch and connect
jumper witch on the control handle
The device move slowing
Battery power shortage or homologous
cable jumper contact is not good
Check the battery power led and
homologous cable jumper contact.
The car suddenly started
Controller is damaged.
Change the controller
The handle which control the forward or
back is no reset.
Repair or change
