12
personnel trained by the manufacturer. After the technician sent by after-sales department of the
manufacturer completed maintenance and servicing work, they should sign on the service log.\
Lifting of the vehicle:
when a Vehicle needs to be raised and maintained, The lifing device muse
be safe and securely attached to the lifting point. when the Vehicle is lifted. Appropriate measures
must be taken to prevent the vehicle from Slipping or tipping over (Wedges blocks can be used)
Cleaning Operation:
Flammable liquid cannot be used for cleaning the stacker. Before cleaning,
take safety precautions to prevent electric sparks (e.g. sparks caused by short circuit). When
operating the accumulator, connectors on it must be disconnected. Use soft air suction or
compressed air, non-conductive and anti-static brushes to clean electric and electronic components.
If spray water or high-pressure cleaners are used to clean the vehicle. All electrical and electronic
components must be carefully Covered beforehand, because moisture can cause malfunctions .Do
not use steam nozzles for cleaning
Operation of Electric System:
Operation on the electric system should only be performed by
specially trained personnel. Before performing any operation on the electric system, precautions
must be made to prevent electric shock. When operating the accumulator, connectors on it must be
disconnected.
Welding operation :
In order to prevent damage to electrical or electronic components. This
electrical component must be removed from the vehicle before any welding operation is performed
Installation:
When repairing or replacing hydraulic components, electric and electronic
components, make sure to install them back to their original positions.
Wheels:
Quality of the wheels has significant effect on stability and driving performance of the
stacker. Modification on wheels can be performed only with the approval from the manufacturer.
When replacing wheels, ensure that the stacker is levelled as delivery state(wheels must be replaced
in pairs, i.e. replace right wheel together with left one).
4.2 Daily Maintenance
4.2.1
Check the electrolyte level of the battery .
The liquid level will be higher when it is charging.
4.2.2
Check every pole, every cable and their covers.
