17
box .The hook of the lifting device must be safe and reliable. And the hook must never fall on a
single battery within the battery pack.
— Press the emergency stop witch and the power key witch to the OFF position so that it is in
the cutoff position
— Disconnect the battery cable connector.
— Connect the lifting device to the lifting hole
— Remove the battery from the top and remove it with the handling equipment .
The installation process is in the reverse procedure.it is importance that the battery must place in
correct place and the wiring is reliable .After re-installing the battery. All cable connections and
connectors must be inspected for obvious damage.
4.4.7 Battery power indicator
Battery power display table: ten article showing represent 100% of the battery.
With the consumption of battery capacity, the glowing article shows will be from top to down.
The color of LED show the different states
：
Name
LED Color
Parameter value
The standard battery remaining
power
Green
70-100%
Orange
30-60%
Red blinking
0-20%
Battery discharge on 70%,red lamp will blinking
“
Energy storage
”
.
Battery discharge on 80%,two lamp will blinking
“
run out of battery
”
,Need to charge the
accumulator.
full Need to recharge Low battery
