Application manual
KNX binary output modules EK-GA1-TP
Release 1.5 - Update: 02/2022
MAEKGA1TP_EN
© EKINEX S.p.A. - All rights reserved
Page 41
7.2 Warning
• Installation, electrical connection, configuration and commissioning of the device can only be carried out
by qualified personnel
• Opening the housing of the device causes the immediate end of the warranty period
• ekinex
®
KNX defective devices must be returned to the manufacturer at the following address: EKINEX
S.p.A. Via Novara 37, I-28010
Vaprio d’Agogna (NO) Italy
7.3 Other information
• This application manual is aimed at installers, system integrators and planners
• For further information on the product, please contact the ekinex
®
technical support at the e-mail address:
[email protected] or visit the website www.ekinex.com
• KNX
®
and ETS
®
are registered trademarks of KNX Association cvba, Brussels
© EKINEX S.p.A. The company reserves the right to make changes to this documentation without notice.