Electronic convection oven rev. 5 _________________________________________MODELS EKF 464 TC – EKF 511 TC
_________________________________________________________________________________________ page 21
Important
The “DELTA T” parameter makes it possible to maintain constant, throughout the cooking stage,
the difference (
) between the temperature inside the food (temperature detected by the
needle-shaped thermal probe) and the temperature inside the cooking chamber. This means that
the value of the temperature in the cooking chamber becomes the sum of the temperature inside
the food and a fixed temperature value “
“ set by the operator.
In practical terms there is a slow increase of the temperature in the cooking chamber, with a
constant difference with respect to the internal food temperature which, exactly because of that,
undergoes a prolonged and delicate cooking process (in the case of meat, proteins are protected,
since surface tensions caused by excessively quick crust formation are avoided).
From PARAMETER SCREEN “% HUMIDITY/STEAM”
(optional function)
After setting the value of the “DELTA T”
parameter, use the “SELECT”
key: the “%
HUMIDITY/STEAM” parameter screen is displayed. Use the keys
and
to set the desired
value. Touch the “SELECT”
key to confirm the set value.
From OVERVIEW SCREEN
Touch the “STEP”
key to select the % HUMIDITY/STEAM parameter
then touch keys
and
to set the desired value. The value is automatically confirmed after 5”. Use the
“START/STOP”
key to activate the cooking cycle.
4.3.7 How programs work
4.3.7.1 Store programs (recipes)
The user is able to store up to 200 programs/recipes, assigning to each a NAME which may consist
of up to 10 letters of the alphabet.
After setting the cooking parameters for the program (recipe) you intend to store, operate as
follows:
press key
to access the “PROGRAMMING MENU” screen.
Press the “STEP”
key and select the symbol
. Confirm the selection with the “SELECT”
key: the screen with the letters of the alphabet will be displayed.
Keys
and
are used to make the horizontal movements (
to the left /
to the right),
and the “STEP”
key for vertical ones (at each “touch” there is a shift down, while if the
“STEP”
key is held the shift is up). When the desired letter is found (highlighted on black
background), use the “SELECT”
key and the chosen letter will be displayed in the top portion
of the screen. If a letter of the alphabet is wrongly selected while composing the name, move to
(symbol on dark background) and use the “SELECT”
key to delete the letter.
After composing the name of the program (recipe), use the “STEP”
key to move to “SAVE”
(writing highlighted on dark background).
