Electronic convection oven rev. 5 _________________________________________MODELS EKF 464 TC – EKF 511 TC
_________________________________________________________________________________________ page 15
When the OVERVIEW SCREEN shows the TEMPERATURE IN CHAMBER parameter
and the
CORE TEMPERATURE parameter
, to go back to setting the TIME parameter
:
-
Use the “STEP”
key to select the CORE TEMPERATURE parameter
.
-
Use the “SELECT” key
(the display shows the PARAMETER SCREEN);
-
Use the “STEP”
key to select the TEMPERATURE IN COOKING CHAMBER parameter
;
-
Use the “SELECT”
key.
At the end of these operations the display will show the red OVERVIEW SCREEN (if the
PREHEATING function is not set) to indicate the TIME parameter is missing (“00.00”).
3.
DELTA T VALUE
Use the keys
and
to increase or decrease the temperature (from 0°C to 100°C). After that
confirm the choice with the
“SELECT”
key.
With “BAKING IN PROGRESS”: the display shows the set temperature in the direction of
and
the actual temperature detected by the core probe in the direction of the symbol
.
The display shows the set temperature in the direction of the symbol
and the actual
temperature detected in the cooking chamber in the direction of the symbol
.
When the OVERVIEW SCREEN shows the CORE TEMPERATURE parameter
and the DELTA T
parameter
, to go back to setting the TIME parameter
:
-
Use the “STEP”
key to select the DELTA T parameter
;
-
Use the “SELECT” key
(the display shows the PARAMETER SCREEN);
-
Use the “STEP”
key to select the TEMPERATURE IN COOKING CHAMBER parameter
;
-
Use the “SELECT”
key.
At the end of these operations the display will show the red OVERVIEW SCREEN (if the
PREHEATING function is not set) to indicate the TIME parameter is missing (“00.00”).
4.3.3.3 HUMIDITY/STEAM setting(Parameter screen)
Use the keys
e
to increase or decrease the humidity/steam value
(from 10% to
100%). After that confirm the choice with the “SELECT”
key.