Ejointech ACOM214, Руководство пользователя

Страница: 83 / 142

4) Rep: It means that phone will replace the number with length and
number appointed.
You can refer to the following examples of different alias application to
know more how to use different aliases and this dial rule.
Call Mode Select different signal protocol, SIP or IAX2
Suffix Set suffix, this is optional config item. It will show
no suffix if you don’t set it.
Delete Length Set delete length. This is optional config item. For
example: if the delete length is 3, the phone will
delete the first 3 digits then send out the rest digits.
You can refer to examples of different alias
application to know how to set delete length.
The following describes how to configure the number IP table to achieve the
configuration of multiple accounts simultaneously:
9T means when you configure the SIP1 server and register, then the user
through all SIP1 call to dial a 9 before the number
；
8T means when you configure the SIP2 server and register, then the user
through all the numbers before calling SIP2 dial 8
；
2T means when you configure the IAX2 server and register, then the user
through all the IAX2 protocol number before the call can dial 2.
Note: For compatibility with 1.6 functions in the 1.7 version of the
configuration file, add "Dialpeer With Line:" This field indicates whether to
enable the on-line inquiry function, 0 is not enabled, 1 means enabled. The
default is 0.
Differences are as follows:
1. Not enabled on-line inquiry