The function and the 1.6 version of the function is the same.
Type: This rule indicates what protocol needs to go.
Destination: indicates the destination address.
0.0.0.1
represents go sip1 line
0.0.0.2
represents go sip2 line
0.0.0.x
represents go sipx line
(For compatibility with old code 0.0.0.0 means go sip1 line, 255.255.255.255
indicates go sip2 line)
Configuration examples are as follows:
If the phone dial 21111, the fact is through SIP2 and called number is 1111.
If the phone dial 32222, the fact is through IAX2 and called number is 2222.
2. Enable on-line query capabilities
Enable on-line query function on the premise that: The phone must be
multi-line products, you can choose when dialing protocol and line. So that
each end of the dial, and also selected protocol and line.
Dialpeer table in the query, the first comparison dialing protocol is selected in
the table and dialpeer agreement, if the same, continue down the match,
otherwise, check the next one.
Step match line information, comparing the selected dial-up line is a line in the
table and dialpeer is the same, if the same, continue down the match,
otherwise the next query.
The third step is for a prefix or exact match.
Mode: to sip, it means that this rule is only used for sip protocol calls; iax2, it
means that this rule is only used iax2 protocol calls.
Destination: indicates the destination address.
0.0.0.1 Indicates that the rule only calls for sip1 online
0.0.0.2 Indicates that the rule only calls for sip2 online
0.0.0.x Indicates that the rule only calls for sipX online
0.0.0.0 Indicates that the rules used in all online calls
Configuration Application examples
The handset off-hook exhale (if SIP1 registration is successful, the default is
SIP1) If the dial 21111, then exhaled directly through SIP1 and the called
number is 21111
If the phone off-hook exhale (if SIP1 registration is successful, the default is
SIP1) If dialing 32222, directly and through SIP1 outgoing called number is
32222
To make the configuration take effect dialpeer function,
Only when the handset off-hook exhaled choose SIP2, and dials 21111, the
corresponding rule is matched by SIP2 exhaled and the called number is 1111
Only when the handset off-hook exhaled Select IAX2, and dials 32222, the
Содержание ACOM214
Страница 3: ...circuitry and be familiar with standard practices for preventing accidents...
Страница 90: ......
Страница 109: ...Notice When a multicast session begins multicast sender and receiver will beep...
Страница 113: ......