FTP ALG
transform intranet IP into extranet IP when
intranet IP is sending out packet.
Select it to enable FTP ALG, the default is enabled.
PPTP ALG
Select it enable PPTP ALG, the default is enabled.
Shows the NAT TCP mapping table
Shows the NAT UDP mapping table
Transfer Type
Select the NAT mapping protocol style, TCP or UDP
Inside IP
Set the IP address of device which is connected to
LAN interface to do NAT mapping.
Inside Port
Set the LAN port of the NAT mapping
Outside Port
Set the WAN port of the NAT mapping
Notice:
Notice:
Notice:
Notice:
After finish setting, click the Add button to add new mapping
table; click the Delete button to delete the selected mapping table.
Shows the outside WAN port IP address and the inside LAN port IP
address.
Notice:
Notice:
Notice:
Notice:
10M/100M adaptive means the network card, and other
equipment physical consultations speed, testing speed under bridge
mode near to 100M, in order to ensure the quality of voice and
communications real-time performance, we made some sacrifices of
NAT under the transmission performance. Transmit with full capability
only when system is idle, so cannot guarantee that the transmission
speed reach to 100M.
Содержание ACOM214
Страница 3: ...circuitry and be familiar with standard practices for preventing accidents...
Страница 90: ......
Страница 109: ...Notice When a multicast session begins multicast sender and receiver will beep...
Страница 113: ......
