Eizo SCD 19102, Инструкция по эксплуатации

Страница: 12 / 104

Safety notes
SCD 19102 / SMD 19102
12
Instruction Manual, 05/2008, A5E01588521A-002
CAUTION
Incorrect installation may result in extensive damage to property.
Installation must be carried out by specialists:
1.
When installing your medical electrical system with our products in an environment with
patients, please observe the safety requirements of EN 60 601-1-1 (IEC 601-1-1)
"Specifications for the safety of medical electrical systems" in order to prevent injury to
patients and users of your systems.
2. Use appropriate measures to ensure that the leakage currents in particular remain
below the necessary limits. Appropriate measures are:
–
Separators for signal input or signal output unit
– Use of a safety isolating transformer
– Use of the additional protective conductor connection
3. Only use signal cables and interface cables specified by the system manufacturer for
the installation.
4. Use power supply cables with PE contact. Only insert into sockets with PE contact.
5. For certain applications, the video earth can be connected separately to the protective
earth via the additional PE connection in the plug panel (observe IEC 601-1-1 ).
6. Close the plug panel using the provided cover, and lock with the screw.
7. Notes on installation:
The stability of the display must be ensured following mounting of the stand/holder. The
insertion depth of the mounting screws into the display must be between 7 and 9 mm.
8. Note for users:
The terminal panel closed by the cover must not be opened by the user.
9. Servicing information:
If housing components have to be removed for servicing, this must not be carried out in
the presence of patients, users, or other persons not involved with servicing.
10. For installations in the USA and Canada:
Molded power supply plugs must comply with the requirements for "hospital grade
attachments" CSA Std. C22.2 No. 21 and UL 498.
CAUTION
Failure to observe the warnings may result in substantial damage to property.
Do not subject device to excessive shocks
Take care when transporting! Use the original packaging! The panel in particular should be
protected against shocks.
Due to mechanical pressure or electrostatic discharge, touching the surface of the Flat
Panel Display may cause momentary distortion of the display.
CAUTION
Subsequent mounting of a stand
The SCD / SMD 19102 C and SCD / SMD 19102 CP displays are delivered without a
stand. To ensure that the complete system (display and stand) complies with the EN 60601
standard, a subsequently mounted stand must also comply with the EN 60601 standard.