Eizo SCD 19102, Инструкция по эксплуатации

Страница: 55 / 104

Commissioning
7.3 Description of OSD menu
SCD 19102 / SMD 19102
Instruction Manual, 05/2008, A5E01588521A-002
55
Service level 2 Function Adjustment/range Description
Bus address Slider from 0 ... 10
Default: 1
Definition of bus address for
display.
H-Scaler clip Slider from 0 ... 100 Supports adjustment to the
aspect ratio
The picture can be expanded
or compressed in the
horizontal direction.
Blind mode Execute Force Mode is a tool for
setting unknown timings that
are not displayed via exact
modes that have already
been stored.
Suitable for the direct input
of previously determined
force mode data.
Note:
See the section "Display
adjustment - Force
mode" (Page 61)
Live mode Execute Force Mode is a tool for
setting unknown timings that
are not displayed via Exact
Modes that have already
been stored.
Suitable for step-by-step
setting of an unknown timing
or for fine adjustment of a
timing whose data have
been entered using "Blind
mode".
Note:
See the section "Display
adjustment - Force
mode" (Page 61)
Force mode
Help Execute Brief description of the force
mode functions
Temperature limit 25 °C ... 90 °C
Default: 60 °C
The temperature can be
selected here above which
the display is dimmed
Shutdown temperature 25 °C ... 90 °C
Default: 70 °C
The temperature can be
selected here above which
the display is switched off
For SCD 19102:
Operation time above 160 cd
For SMD 19102:
Operation time above 400 cd
Information Display operating hours
counter over 160 Cd/m² for
SCD 19102 and 400 Cd/m²
for SMD19102
Temperature
For SCD 19102:
Operation time below 160 cd
For SMD 19102:
Operation time below 400 cd
Information Display operating hours
counter below 160 Cd/m² for
SCD 19102 and 400 Cd/m²
for SMD19102