Eizo RadiForce RX840, Инструкция по эксплуатации

Страница: 9 / 44

7
En
gli
sh
2.
Connect the AC adapter power cable to the power connector on the monitor.
Attention
• Do not remove or connect the cable while the AC adapter main power is on.
• Do not install the AC adapter in the wrong orientation. The side with the EIZO logo should face up.
Check the shape of the monitor connector, and connect the power cable.
Tighten the screw for fixing the power cable to secure the power cable.
Connecting to the Monitor
3.
Plug the power cord into a power outlet and the power connector on the AC
adapter.
4.
Turn on the AC adapter main power.
-: On, ○: Off
5.
Connect the USB cable when using RadiCS LE or ScreenManager Pro for
Medical.
Connecting to the Monitor Connecting to a Computer
6.
Press to turn on the monitor.
The monitor’s power indicator lights up green.
7.
Turn on the PC.
The screen image appears.
If an image does not appear, refer to “No picture” (page 10) for additional advice.
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the AC adapter main
power switch or unplugging the power cord completely shuts off power supply to the monitor.
Adjusting the Screen Height and Angle
Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel of the screen to the
best condition for working.
Attention
• Be sure that the cables are correctly connected.