Eizo RadiForce RX840, Инструкция по эксплуатации

Страница: 5 / 44

3
En
gli
sh
Use the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
• Do not place in a dusty or humid environment.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inflammable gas environment.
To avoid danger of suffocation, keep the plastic packing bags away from babies and children.
Use the enclose AC adapter.
The enclosed AC adapter (PSA-064) is for use with this product only. Do not use the AC adapter with other equipment. Connecting
to power sources that do not match the power ratings of the AC adapter mayresult in fire or electric shock.
Use the enclosed power cord and connect to the standard power outlet of your country.
Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock.
Power supply: 100-240Vac 50/60Hz
To disconnect the power cord or adapter power cable, grasp the plug
firmly and pull.
Tugging on the cord or cable may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may
cause fire, electric shock, or equipment damage.
Power supply: 100-240Vac 50/60Hz
• Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord and AC adapter with care.
Handle the power cord and AC adapter with care.
Do not place heavy objects on, pull or tie the power cord or the AC adapter. Use of a damaged cord or
AC adapter may result in fire or electric shock.
For the electrical safety, do not connect or disconnect the power cord in the presence of patients.
Never touch the plug, AC adapter or power cord during a thunderstorm.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. Before installation, make
sure that desks, walls, and others an arm stand is fixed on have adequate mechanical strength. When the unit is dropped, please
ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When
reattaching the tilt stand, please use the same screws and tighten them securely.
Handle the batteries for the remote control with care. (Only for the monitor with a remote control)
Not doing so may result in the battery explosion or the liquid leaking.
• Do not disassemble, heat, or throw the provided batteries in water.
• Install/change batteries in a correct way.
• When replacing batteries, replace all of them at the same time with new batteries of the same brand and type.
• Insert batteries with correct direction of the plus (+) and minus (-) sides.
• Do not use the battery with coating damaged.
• Dispose of your battery in a designated disposal area.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the
skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms
result, please consult your doctor.