11
Chapter 1 Introduction
1-3. Controls and Functions
9
10
8
4
3
2
1
7
6
5
1. Ambient Light
Sensor
This sensor measures illumination with the RadiCS / RadiCS LE function that monitors
changes in illumination. Refer to RadiCS / RadiCS LE User’s Manual for details.
The values measured by this sensor are not reflected on the RadiCS environmental
illumination because the sensor is simplified one.
2. Control button
Displays the operation guide. Set menus according to the operation guide.
For details on the operation guide and the menus, refer to the Installation Manual (on the
CD-ROM).
3.
button
Turns the power on or off.
4. Power Indicator
Indicates the monitor’s operation status.
Green: Operating Orange: Power saving mode Off: Power off
5. Power connector
Connects the power cord.
6. Input Signal
Connector
Connect signal cables.
Left: DisplayPort connector
Center: DVI-D connector
Right: D-Sub mini 15-pin connector
7. USB upstream port
Connects the USB cable to use the software that needs USB connection.
8. Security lock slot
Complies with Kensington’s MicroSaver security system.
9. Stand
Used to adjust the height and angle (tilt, swivel) of the monitor screen.
10. Cable holder
Covers the monitor cables.
English
