8
Notice for this Monitor
To Use the Monitor for a Long Time
●
Quality control
•
The display quality of monitors is affected by the quality level of input signals and the degradation of
the product. Perform visual checks and periodic constancy tests to comply with medical standards /
guidelines according to your application, and carry out calibration as necessary. Use of the RadiCS
monitor quality control software enables the user to perform high-level quality control that meets
medical standards / guidelines. For how to perform various tests and calibration, refer to the
RadiCS User's Manual.
• It takes about 30 minutes for the monitor display to stabilize. Please wait 30 minutes or more after
the monitor power has been turned on or the monitor has recovered from the power saving mode
before performing various tests for quality control, calibration, or screen adjustment of the monitor.
• We recommend that monitors be set to the recommended level or lower to reduce changes in
luminosity caused by long-term use and maintain stable brightness.
Attention
• The display status of the monitor may change unexpectedly due to an operating error or unexpected setting
change. Using the monitor with the control buttons locked is recommended after adjusting the screen of the
monitor. For details on how to set, refer to the Installation Manual (on the CD-ROM).
●
Cleaning
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation
lifetime.
Carefully wipe the cabinet and panel surface with a soft cloth moistened with water or the following
chemicals.
Chemicals that may be used for cleaning
Material name
Product name
Ethanol for disinfection
Ethyl alcohol (Ethanol)
Isopropyl alcohol
Isopropyl alcohol
Chlorhexidine gluconate
Hibitane solution
Sodium hypochlorite
Purelox
Benzalkonium chloride
Welpas
Alkyldiamino ethylglycine
Tego 51
Glutaral
Cidexplus 28
Attention
•
Do not use chemicals frequently. Chemicals such as alcohol and antiseptic solution may cause gloss
variation, tarnishing, and fading of the cabinet or panel, and also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the cabinet or panel.
• Do not attach chemicals directly to the monitor.
Note
• Using ScreenCleaner (optional) for cleaning of the cabinet and the panel surface is recommend.
To Use the Monitor Comfortably
•Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
•Look at the screen from a proper distance and from a proper angle.
