25
Chapter 2 Adjusting Screens
●
To adjust the temperature
The color temperature can be adjusted.
The color temperature is normally used to express the color of “White” and/or “Black” by a numerical value.
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the flame
temperature. The gain preset values are set for each color temperature setting value.
Setting Range
Settings
Purpose
4000K to 10000K
Specify color temperature in units of 100 K
Native
The image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
Adobe
®
RGB
Change to color temperature in conformance with Adobe
®
RGB.
sRGB
Change to color temperature in conformance with sRGB.
User
Displayed when gain is changed.
Procedure
1. Choose “Color” from the Adjustment menu, and press
.
2. Choose “Temperature” from “Color”, and press
.
3. Use
or
for adjustment.
4.
Press
to exit.
Note
•
“Gain” allows you to perform more advanced adjustment (see
).
●
To adjust gamma
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the
variation rate is not proportional to the input signal. To keep the balance between the input signal and the
brightness of the monitor is called as “Gamma correction”.
Setting Range
Settings
Purpose
1.6 to 2.7
Set the gamma value.
Adobe
®
RGB
Set the gamma curve defined by Adobe
®
RGB.
sRGB
Set the gamma curve defined by sRGB.
Paper
Display image look like it is printed on paper.
Procedure
1. Choose “Color” from the Adjustment menu, and press
.
2. Choose “Gamma” from “Color”, and press
.
3. Use
or
for adjustment.
4.
Press
to exit.
