- 7 -
Chapter 1
Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
•
31.1″ widescreen
•
Wide color gamut display (Adobe
®
RGB coverage: 99%, DCI-P3 coverage: 98%)
•
Achieves contrast ratio of 1500:1 (typical)
*1
A high contrast ratio allows display of crisper black with reduced whiteness.
*1 When “DUE Priority” is set to “Brightness”
•
Supports a resolution of 4096 × 2160.
Can display 4K (4096 × 2160) resolution, defined by the DCI standard, as is.
•
Pixel density: 149 ppi
Can display text and images in high definition.
•
IPS panel with 89˚ horizontal and vertical wide viewing angles
•
The time from switching on the monitor until the display is stable has been shortened to approximately 3 minutes
*2
*2 According to EIZO measurement conditions. However, if performing SelfCalibration (
page 27
), it is necessary to wait at least 30 minutes after turning on the power, in
order to obtain correct measurement results.
•
Frame synchronization mode supported (23.75 – 30.25 Hz, 47.5 – 60.5 Hz)
•
Support for four digital signal inputs (DisplayPort (HDCP) × 2, HDMI (HDCP, Deep Color) × 2)
- DisplayPort (supports 8 bit and 10 bit)
*3,*4
- HDMI (supports 8 bit, 10 bit, and 12 bit)
*3, *4
*3 Audio signals not supported.
*4 The maximum screen display is 10 bits.
•
Color mode function
Reproduces a color temperature, gamma, and gamut compliant with the following standards.
- Broadcasting standards “EBU/REC709/REC1886/REC2020/SMPTE-C”
- Digital cinema standard “DCI”
- Adobe
®
RGB / sRGB
See
“Chapter 3 Advanced Adjustments/Settings” (page 20)
•
This product is equipped with a built-in calibration sensor, and supports SelfCalibration in which the monitor executes calibration independently.
See
“SelfCalibration” (page 27)
