- 10 -
Chapter 1
Introduction
●
Rear
12
10
11
13
9
6
8
5
7
5. Main power switch
Turns the main power on or off.
6. Power connector
Connects the power cord.
7. Input signal connectors
On the monitor rear in order of left to right: HDMI connector × 2, DisplayPort connector × 2
8. USB upstream port
Connects to the USB cable when using software that requires a USB connection, or when using the USB Hub function.
9. USB downstream port
Connects to a peripheral USB device.
The “CHARGE” port supports quick recharging (
page 35
).
10. Handle
This handle is used for transportation.
Attention
•
Firmly grasp and hold the monitor by the bottom while grabbing the handle, and carefully convey the monitor so as not to drop it.
Do not hold the sensor section on the front side of the monitor.
11. Security lock slot
Complies with Kensington’s MicroSaver security system.
12. Stand
*2
Adjusts the height and angle (tilt and swivel) of the monitor.
13. Cable holder
*3
Covers the monitor cables.
*2 An optional arm (or an optional stand) can be attached by removing the stand section (see
“6-1. Attaching the Optional Arm” (page 46)
).
*3 For details on mounting the cable holder, see
“6-2. Attaching/Detaching Cable Holder” (page 47)
.
